LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Maintenance, Diagnosis (Fluid Capacity Tables) [Coupe]) >> 03 Maintenance, Diagnosis >> AUDI Q3 (8U)

AUDI Q3 (8U)

WARNING: This page is about a different variant/trim than selected.
CAUTION:

All quantities are approximate. Always refer to the Repair Information and/or the Maintenance Procedures for correct filling instructions.

Refer to Technical Bulletin 2010043 for engine oils meeting the required Audi oil quality standards.

Part numbers are for reference only. Always check with your parts department for the latest information.

* Funnels or aftermarket speed filling devices are not allowed when filling the engine with oil.

Component/System Capacity Part Number/Specification
2.0 L Engine (CCTA)
  Oil and Filter Change 4.5 L (4.8 qt.) VW 502 00
Coolant 10.0 L (10.5 qt.) Refer to Parts Information
6 Speed Tiptronic Transmission
  Initial Fill 7.0 L (7.4 qt) Refer to Parts Information
Bevel Box 0.9 L (1.0 qt.) Refer to Parts Information
Haldex Clutch - Initial 0.85 L (0.9 qt.) Refer to Parts Information
Haldex Clutch - Refill 0.7 L (0.7 qt.)
Rear Final Drive 0.95 L (1.0 qt.) Refer to Parts Information
Brake System
  - 1.0 L (1.1 qt.) Refer to Parts Information
A/C System
  Refrigerant 520 ± 15g (18.3 ± 0.5 oz.) Refer to Parts Information
PAG Oil - Sanden 110 ± 10 cc (3.7 ± 0.3 fl. oz.) Refer to Parts Information
  PAG Oil - Denso 90 ± 10 cc (3.0 ± 0.3 fl. oz.) Refer to Parts Information
Window/Headlamp Washer System
  - 4.5 L (4.8 qt.) Refer to Parts Information