Charge Air Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi TT Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

If there are small impressions on the slats. Refer to RADIATOR AND CONDENSER ASSEMBLY .
Secure all hose connections with hose clamps that match the ones used in series production.

-- Install the Distance Regulation Control Module -J428-. Refer to appropriate service information. .

-- Install the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .