Coolant Thermostat, Removing And Installing: Installing
WARNING: This page is about a different car, the 2018 Audi TT Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- Replace the coolant thermostat after removing.
- Replace the O-ring after removing.
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
- Used coolant cannot be used again.
-- Clean and smooth the O-ring sealing surface.
-- Coat the new O-ring with coolant.
-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .