Coolant Pump, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi TT Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Replace the O-ring after removing.
Used coolant cannot be used again.

-- Clean and polish the sealing surface for the integrated silicone seal on the coolant pump.

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

Additional procedures depending on the model. Refer to COOLANT PUMP, REMOVING AND INSTALLING .

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .