Right Coolant Pipe, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Audi TT Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Free up the fuel hose and hose for the EVAP system.
-- Remove the bolt -2- and the nut -3-.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Place a cloth underneath to catch escaping coolant.
-- Loosen the hose clamps -1 and 4-, then clamp off the coolant hoses with the :3094
and then remove them.
-- Remove the right coolant pipe.