Left Coolant Pipe, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi TT Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
Check the vacuum hoses for damage before the assembly and replace if necessary.
Used coolant cannot be used again.

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .