Special Tools

WARNING: This page is about a different car, the 2018 Audi TT Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Crankshaft Adapter: T03003A

Fig 1: Crankshaft Adapter T03003
Courtesy of AUDI OF AMERICA, LLC
Locking Pins: T03006

Courtesy of AUDI OF AMERICA, LLC
Oil Pump Alignment Plate: T03005A

Courtesy of AUDI OF AMERICA, LLC
Counterhold - Multiple Use: T10172A with Counterhold - Multiple Use - Adapter: T10172/9

Fig 2: Counterhold - Kit - Multiple Use T10172
Courtesy of AUDI OF AMERICA, LLC
Socket Bit XZN 10: T10501

Fig 3: Identifying Socket Bit
Courtesy of AUDI OF AMERICA, LLC
Locking Pin (3 pc.): T40011

Fig 4: Identifying Locking Pin T40011
Courtesy of AUDI OF AMERICA, LLC
Crankshaft Locking Pin: T40069

Fig 5: Crankshaft Locking Pin T40069
Courtesy of AUDI OF AMERICA, LLC
Camshaft Lock: T40264 Camshaft Lock - Adapter: T40264/2A

Courtesy of AUDI OF AMERICA, LLC
Oil Pressure Gauge Kit: VAG1342

Fig 6: Identifying Oil Pressure Gauge Kit
Courtesy of AUDI OF AMERICA, LLC
Hose Clip Pliers: VAS6362

Fig 7: Hose Clip Pliers
Courtesy of AUDI OF AMERICA, LLC
Seal Installer - Valve Stem Seal Tool Adapter Plates: 2036/1 from the Seal Installer - Valve Stem Seal Tool: 2036

Fig 8: Identifying Adjustable Rod 2036
Courtesy of AUDI OF AMERICA, LLC
Trim Removal Wedge: 3409

Fig 9: Identifying Trim Removal Wedge
Courtesy of AUDI OF AMERICA, LLC
Not Illustrated:
24 mm Socket: T40363