Oil Pressure, Checking

WARNING: This page is about a different car, the 2018 Audi TT Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Oil Pressure Gauge Kit: VAG1342

Procedure

Oil level OK
Engine oil temperature approximately 80 °C (176 °F)

-- Remove the Oil Pressure Sensor -G10-. Refer to Oil Pressure Sensor -G10-, REMOVING AND INSTALLING .

-- Install the oil pressure switch in the : VAG1342 .

-- Install the : VAG1342 in the hole for the oil pressure switch in the oil filter bracket.

-- Start the engine.

Oil pressure at idle at least 1.0 bar (14.5 psi).
Oil pressure at 2000 RPM at least 2.5 bar (36.25 psi).

-- Install the Oil Pressure Sensor -G10-. Refer to Oil Pressure Sensor -G10-, REMOVING AND INSTALLING .