Oil Pump, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Audi TT Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Trim Removal Wedge: 3409
- Crankshaft Adapter: T03003
- Oil Pump Alignment Plate: T03005A
- Locking Pin (3 pc.): T40011
- Crankshaft Locking Pin: T40069
- Camshaft Lock: T40264 Camshaft Lock - Adapter: T40264/2A
Tools, Preparing
The camshafts are secured with the : T40264/2A in "TDC".
-- If only one : T40264/2 is available, the lower bar -arrow- must be separated from the : T40264/2 .
Tools, Preparing:
-- When only the tool Crankshaft Adapter: T03003A is available the pins must be separated so that it can be placed on the vibration damper.