Oil Pan Upper Section, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Audi TT Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Seal Installer - Valve Stem Seal Tool Adapter Plates: 2036/1 from the Seal Installer - Valve Stem Seal Tool: 2036
- Locking Pins: T03006
- Counterhold - Multiple Use: T10172A with Counterhold - Multiple Use - Adapter: T10172/9
- Crankshaft Locking Pin: T40069
- Crankshaft Adapter: T03003A
- Protective Eyewear
- Hand Drill with Plastic Brush Attachment
- Sealant. Refer to the Parts Information.
Tools, Preparing:
-- When only the tool Crankshaft Adapter: T03003 is available the pins must be separated so that it can be placed on the vibration damper.