Engine Oil Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi TT Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Replacing the seals after removal.
Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.

-- Check the oil level. Refer to ENGINE OIL .

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .

Additional procedures depending on the model. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .