Crankcase Ventilation Module, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Audi TT Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the connectors -arrows- and free them up.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -2- and press the bracket -1- to the side.

-- If equipped, remove the bolts -arrows- and remove the connection -1-.

-- Loosen the hose clamps -arrows- and remove the hoses.

Fig 1: Crankcase Ventilation Module - Tightening Specifications and Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 10- and remove the crankcase ventilation module.