Oil Spray Jets, Removing And Installing: Installing
WARNING: This page is about a different car, the 2018 Audi TT Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- Do not bend the oil spray jets.
-- Bring the oil spray jet -1- into the installation position at the same time pay attention to the alignment pin -arrow-.
-- Tighten the pressure relief valve -2-.
-- Install the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .
-- Valve Timing, Checking. Refer to Camshaft Timing Chain, Removing From Camshafts - Installing .