Overview - Rear Lid Upper Trim Panel
Courtesy of AUDI OF AMERICA, LLC
- Side Clamp
- Replace damaged or deformed clips
- Remove any remaining clips in the rear lid mounting points using the Omega Clip Tool:T40280
. To install, insert into the trim panel.
- Insert in the trim panel
- Quantity: 3 on the left and right side
- Side Rubber Buffer
- Insert in the trim panel
- Quantity: 2 on the left and right side
- Rear Lid Upper Trim Panel
- Upper Rubber Buffer
- Insert in the trim panel
- Quantity: 4
- Upper Clip
- Remove any remaining clips in the rear lid mounting points using the Omega Clip Tool:T40280
. To install, insert into the trim panel.
- Replace damaged or deformed clips
- Insert in the trim panel
- Quantity: 4
- Expanding Clip
- Remove using the Clip Pliers:T40172A
- Quantity: 1 on the left and right side