Overview - Bumper Cover, Bumper Cover Mount

Courtesy of AUDI OF AMERICA, LLC

1. Lower Mount
   • For the bumper cover
   • Removing and installing. Refer to BUMPER COVER LOWER MOUNT, REMOVING AND INSTALLING .
2. Bolt
   • 1.8 Nm
   • Quantity: 2
3. Bolt
   • Quantity: 2
   • Tightening sequence. Refer to Fig 1
4. Fitting Bolt
   • Quantity: 2
   • Tightening sequence. Refer to Fig 1
5. Front Side Mount
   • For the bumper cover
   • Removing and installing. Refer to BUMPER COVER FRONT SIDE MOUNT, REMOVING AND INSTALLING .
6. Bolt
   • Tightening sequence. Refer to Fig 1
7. Center Side Mount
   • For the bumper cover
   • Removing and installing. Refer to BUMPER COVER REAR SIDE MOUNT, REMOVING AND INSTALLING .
8. Rear Side Mount
   • For the bumper cover
   • Removing and installing. Refer to BUMPER COVER REAR SIDE MOUNT, REMOVING AND INSTALLING .
9. Bolt
   • Tightening sequence. Refer to Fig 1
10. Nut
    • 2 Nm
    • Quantity: 3
11. Center Mount
    • For the bumper cover
    • Removing and installing. Refer to BUMPER COVER CENTER MOUNT, REMOVING AND INSTALLING .

Bumper Cover Side Mount - Tightening Specification and Sequence 

Fig 1: Bumper Cover Side Mount - Tightening Specification and Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in the sequence shown -1 to 6- to 3 Nm.