Overview - Bumper Cover
- Bolt
- 4.5 Nm
- Quantity: 3
- Bolt
- 1.8 Nm
- Quantity: 2
- Bumper Cover End Plate
- Removing and installing. Refer to FRONT BUMPER COVER END PLATE, REMOVING AND INSTALLING .
- Towing Eye Cover
- Lower Reinforcement Brace
- Removing and installing. Refer to LOWER REINFORCEMENT BRACE, REMOVING AND INSTALLING .
- Bumper Cover
- Removing and installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
- Molded Foam Part
- Removing and installing. Refer to MOLDED FOAM PART, REMOVING AND INSTALLING .
- Bolt
- 1.8 Nm
- Quantity: 2
- Side Reinforcement Brace
- Removing and installing. Refer to SIDE REINFORCEMENT BRACE, REMOVING AND INSTALLING .
- Mount
- For the bumper cover
- To secure the headlamp
- Removing and installing. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING .
- Bolt
- Tightening specification. Refer to -item 1- OVERVIEW - FENDER .
- Bolt
- 2 Nm
- Spray Nozzle Cover
- For the headlamp washer system
- Removing and installing. Refer to HEADLAMP WASHER SYSTEM SPRAY NOZZLE COVER, REMOVING AND INSTALLING .
- Air Intake Grille
- There are different versions.
- Removing and installing. Refer to AIR INTAKE GRILLE, REMOVING AND INSTALLING .