LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers (1 Of 2) [Roadster] >> 63 Bumpers >> Rear Bumper >> Bumper Cover, Removing And Installing >> Installing >> Install in reverse order of removal and note the following:

Install in reverse order of removal and note the following:

-- If the vehicle has lane change assistance, the Lane Change Assistance Control Module -J769- / Lane Change Assistance Control Module 2 -J770- must be recalibrated. Refer to LANE CHANGE ASSISTANCE, CALIBRATING .

Tightening Specifications 

scientia non olet · About LEMON Manuals