Center Convertible Top Seal, Removing And Installing: Installing
Install in reverse order of removal and note the following:
-- Make sure that the guides for the convertible top seal are properly seated in the mounts on the retaining strip.
Check the position of the door window to the seal and adjust if necessary:
-- For the side adjustment, slide the shims -3- between the guide rail and the convertible top arm -2- proportionate to the door window.
-- Tighten the bolts -1- to the tightening specification.
Fig 1: Slide In Shims -3- Between Guide Rails And Convertible Top Guide -2- Appropriate To Door Window
Tightening Specifications