Window Frame to Convertible Top Adjustment Dimension

Courtesy of AUDI OF AMERICA, LLC

• Gap dimension -a- = 8.5 mm
• Dimension -b- = 2.0 mm
• Gap dimension -c- = 8.5 mm
• Dimension -d- = 3.0 mm
• Gap dimension -e- = 8.5 mm
• Dimension -f- = 3.0 mm
• Gap dimension -g- = 8.5 mm
• Dimension -h- = 2.5 mm
• Dimension -j- = 1.5 mm
• Gap dimension -k- = 11.5 mm

-1- Window frame

-2- Convertible top

-3- Seal

-4- Trim molding

Side and length adjustment on convertible top locking motor. Refer to SIDE AND LENGTH ADJUSTMENT ON Convertible Top Locking Motor -V223- .