Convertible Top Frame Flap Adjustment Dimension

Courtesy of AUDI OF AMERICA, LLC

Convertible Top Frame Flap to the Rear Side panel

• Gap dimension -a- = 5.8 mm
• Dimension -b- = 5.0 mm
• Gap dimension -j- = 5.9 mm
• Dimension -k- = 4.8 mm

-1- Convertible top frame flap

-2- Rear side panel

Adjust the convertible top frame flap. Refer to CONVERTIBLE TOP FRAME FLAP, ADJUSTING .

Convertible Top Frame Flap to the Rear Panel Cover

• Gap dimension -c- = 4.0 mm
• Dimension -d- = 1.0 mm
• Dimension -e- = 0.85 mm
• Gap dimension -f- = 4.5 mm
• Dimension -g- = 0.4 mm
• Gap dimension -h- = 4.5 mm

-1- Convertible top frame flap

-3- Rear panel cover

Adjust the convertible top frame flap. Refer to CONVERTIBLE TOP FRAME FLAP, ADJUSTING .