Seat Side Trim On Tunnel Side, Removing And Installing: Removing
WARNING:
- Follow all safety precautions when working on pyrotechnic components. Refer to SAFETY PRECAUTIONS FOR PYROTECHNIC COMPONENTS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker pin, for example.
-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Fasten the front seat on the :VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Remove the expanding rivet -1- from the seat side trim on the tunnel side.
-- Disengage the front seat side trim -2- from the seat pan, to do this release the retaining tab -3- and pull the seat side trim outward.
-- Disengage the seat side trim on the tunnel side from the backrest hinge in direction of -arrow- and remove.