Overview - Seat Pan, Seat Forward/Back Adjustment

Fig 1: Exploded View Of Seat Pan, Seat Forward/Back Adjustment

Courtesy of AUDI OF AMERICA, LLC

1. Seat Forward/Back Adjustment Handle
   • Manual front seat
   • Removing and installing. Refer to SEAT FORWARD/BACK ADJUSTMENT HANDLE, REMOVING AND INSTALLING .
2. Seat Forward/Back Adjuster Release Cable
   • Unit
   • Manual front seat
   • Removing and installing. Refer to SEAT FORWARD/BACK ADJUSTER RELEASE CABLE, REMOVING AND INSTALLING .
3. Bolt
   • 3.5 Nm
   • Quantity: 2
4. Seat Pan Lower Frame
   • Driver side: with Driver Seat Forward/Back Adjustment Motor -V28-
   • Front passenger side: with Front Passenger Seat Forward/Back Adjustment Motor -V31-
   • Cannot be disassembled; motor and seat pan lower frame are pre-adjusted from the manufacturer
   • Power front seat
   • Removing and installing. Refer to SEAT PAN, REMOVING AND INSTALLING, POWER FRONT SEAT .
   • To replace the seat belt latch install in the new lower frame
5. Bolts
   • 22 Nm
   • Replace after removing
   • Self-locking
   • Clean the threaded hole for the bolt with for example a thread tap.
6. Seat Pan Upper Frame
   • Power front seat
   • Removing and installing. Refer to SEAT PAN UPPER FRAME, REMOVING AND INSTALLING, POWER FRONT SEAT .
   • Install all electrical and electronic components and wires in the new upper frame.
7. Bolts
   • 22 Nm
   • Replace after removing
   • Self-locking
   • Clean the threaded hole for the bolt with for example a thread tap.