LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Hood, Lids (2 Of 2) [Roadster] >> 55 Hood, Lids >> Rear Lid >> Rear Lid, Removing And Installing >> Stop Buffer, Removing And Installing >> Installing

Stop Buffer, Removing And Installing: Installing

Install in reverse order of removal and note the following:

-- Check the seal -2- between the stop buffer and the body for damage.

-- Adjust the stop buffer. Refer to REAR LID, ADJUSTING .

scientia non olet · About LEMON Manuals