LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Hood, Lids (2 Of 2) [Roadster] >> 55 Hood, Lids >> Rear Lid >> Rear Lid, Removing And Installing >> Stop Buffer Stop, Removing And Installing >> Removing

Stop Buffer Stop, Removing And Installing: Removing

-- Push through the cotter pin -1- and remove the stop -2-.

NOTE:

The cotter pin falls behind the luggage compartment side trim panel.

Push the luggage compartment side trim panel slightly to the side and remove the cotter pin. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .

GWWA55-11097Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals