Emergency Release Cable To Latch, Removing And Installing: Removing

-- Remove the rear lid lower trim panel. Refer to OVERVIEW - REAR LID LOWER TRIM PANEL .

-- Pull the release cable -5- to the right in direction of -arrow- and open the coupling cover -6- and the release cable nipple is disengaged while doing so.

-- Free up the coupling catch on the mount -4- and disengage to the left at the same time.

-- Remove the release cable bracket -2- from the mount.

-- Disengage the release cable nipple -3- from the latch.

-- Remove the release cable -1-.

Courtesy of AUDI OF AMERICA, LLC