LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Hood, Lids (2 Of 2) [Roadster] >> 55 Hood, Lids >> Hood >> Latch Release Lever, Removing And Installing >> Hook Release Lever, Removing And Installing >> Installing

Hook Release Lever, Removing And Installing: Installing

Install in reverse order of removal and note the following:

-- Slide the clip completely into the release lever.

-- Press the release lever on until it audibly engages.

scientia non olet · About LEMON Manuals