Hood, Removing And Installing
CAUTION:
- A hood with a deployed pedestrian protection may only be opened after it has been pushed back and locked in its original position on the hinge.
-- Remove the spray nozzles. Refer to SPRAY NOZZLES, REMOVING AND INSTALLING .
-- Remove the grommet -3-.
-- Guide the wiring harness/washer fluid hose -2- out of the hood and free it up -arrows-.
WARNING:
Risk of injury!
- A second technician is needed during removal and installation to support and hold the hood.
-- Remove the nuts -1 and 4- on the hinge.
-- Remove the hood -5-.
Installing
Install in reverse order of removal and note the following:
-- Adjust the hood. Refer to HOOD, ADJUSTING .
Tightening Specifications
- Refer to OVERVIEW - HOOD