Hood, Adjusting, Hinge
Special tools and workshop equipment required
- Gauge - Gap Adjustment:3371
- Gap dimensions. Refer to HOOD ADJUSTMENT DIMENSIONS .
Side and Length Adjustment on the Hood:
-- Loosen the nuts -1 and 2-.
-- Align the hood -3- side- and lengthwise according to the marks -arrows-.
-- Tighten the nuts.
Height Adjustment at the Hinge:
-- Loosen bolts -2 and 3-.
-- Adjust the height of the hinge -1-.
-- Tighten the bolts.
Tightening Specifications
- Refer to OVERVIEW - HOOD