LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Hood, Lids (1 Of 2) [Roadster] >> 55 Hood, Lids >> Rear Lid >> Adjusting Buffer Stop, Removing And Installing >> Removing

Adjusting Buffer Stop, Removing And Installing: Removing

-- Push through the cotter pin -1- and remove the stop -2-. At the same time the cotter pin falls behind the luggage compartment side trim panel.

GWWA55-11097Courtesy of AUDI OF AMERICA, LLC

-- Push the lower luggage compartment side trim panel slightly to the side and remove the cotter pin. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .