LEMON Manuals: Even more car manuals for everyone

Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Hood, Lids (1 Of 2) [Roadster] >> 55 Hood, Lids >> Rear Lid >> Adjusting Buffer Stop, Removing And Installing >> Installing

Adjusting Buffer Stop, Removing And Installing: Installing

Install in reverse order of removal and note the following:

-- Check the seal -3- between the stop and body for damage.

scientia non olet · About LEMON Manuals