LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Hood, Lids (1 Of 2) [Roadster] >> 55 Hood, Lids >> Hood >> Impact Guard, Removing And Installing >> Rear Impact Guard, Removing And Installing >> Removing

Rear Impact Guard, Removing And Installing: Removing

-- Carefully warm the rear impact guard -3- using a :VAG1416  .

GWWA55-11056Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear impact guard and carefully loosen the bonding -1 and 2- while doing so.