LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Hood, Lids (1 Of 2) [Roadster] >> 55 Hood, Lids >> Fuel Filler Door Unit >> Fuel Filler Door Unit Drain Hose, Removing And Installing >> Installing

Fuel Filler Door Unit Drain Hose, Removing And Installing: Installing

Install in reverse order of removal and note the following:

-- Insert the drain hose -1- from above into the fuel filler door cup -2-.

GWWA55-11110Courtesy of AUDI OF AMERICA, LLC

-- Push the dust protector -4- on the drain hose -2- until over the mark -3-.

GWWA55-11111Courtesy of AUDI OF AMERICA, LLC

-- Insert the drain hose on the bumper mount -1-.