Overview - Bumper Cover
- Rear Bumper Cover
- Removing and installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
- Expanding Rivet
- Bolt
- 4 Nm
- Expanding Rivet
- Side Reinforcement
- Removing and installing. Refer to BUMPER COVER SIDE REINFORCEMENT, REMOVING AND INSTALLING .
- Clip
- Quantity: 2
- Bolt
- 2 Nm
- Quantity: 3
- Lane Change Assistance Control Module
- Equipment levels
- Overview. Refer to appropriate service information. .
- Bolt
- Quantity: 3
- Tightening specification. Refer to appropriate service information. .
- Cover
- Quantity: 4
- Nut
- 5 Nm
- Quantity: 4
- Threaded Pin
- Quantity: 2
- Clip
- Quantity: 2
- Bolt
- 3 Nm
- Cover
- Center Reinforcement
- Removing and installing. Refer to BUMPER COVER CENTER REINFORCEMENT, REMOVING AND INSTALLING .
- Cover
- For the towing eye
- Bolt
- 1.8 Nm
- Quantity: 2
- Bolt
- 1.8 Nm
- Quantity: 2
- Bumper Cover Lower Section
- There are different versions.
- Removing and installing. Refer to BUMPER COVER LOWER SECTION, REMOVING AND INSTALLING .