Front Bumper Cover End Plate, Removing And Installing: Removing

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Free up the central connector -1- at the retainer.

-- If installed, free up the water line -2- for the headlamp washer system.

-- Remove the bolts in direction of -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the screw -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainer -3- in direction of -arrow- and remove the front bumper cover end plate -2- toward the rear (in the direction of travel).

-- Free up the wiring harness -4-.