Air Intake Grille, Removing And Installing: Removing

-- Remove the lower reinforcement brace. Refer to LOWER REINFORCEMENT BRACE, REMOVING AND INSTALLING .

-- Remove the side reinforcement brace. Refer to SIDE REINFORCEMENT BRACE, REMOVING AND INSTALLING .

-- If equipped, disconnect the connector for the parking aid sensor -4- and the sensor for the parking steering sensor -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Free up the wiring harness.

-- Free up the washer fluid hose -2-.

-- Release the catches in direction of -arrows- and remove the air intake grille -2- toward the rear off of the bumper cover -5-.