LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumpers (1 Of 2) [Roadster] >> 63 Bumpers >> Front Bumper >> Wheel Housing Liner Retaining Strip, Removing And Installing >> Removing

Wheel Housing Liner Retaining Strip, Removing And Installing: Removing

-- Remove the front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Remove the front wheel spoiler. Refer to FRONT WHEEL SPOILER, REMOVING AND INSTALLING .

-- Remove the bolt -2-.

GWWA63-11148Courtesy of AUDI OF AMERICA, LLC

-- If equipped, remove the expanding rivets -arrows-.

-- Carefully warm the retaining strip -1- using a :VAG1416  .

-- If equipped, release the retainer -3-.

-- Lift the retaining strip from the bumper cover -4- using the :T10383/1  and at the same time carefully loosen the bonding.