LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Frames [Roadster] >> 72 Seat Frames >> Front Seats >> Seat Pan, Disassembling And Assembling >> Seat Rail Cover, Removing And Installing >> Removing

Seat Rail Cover, Removing And Installing: Removing

Fig 1: Prying Cover Caps From Seat Rail Covers And Seat Fore/Aft Adjustment Spindle With Trim Removal Wedge 3409
GWWA72-10332Courtesy of AUDI OF AMERICA, LLC

-- Front: Pry off the spindle cover -1- from the seat rail cover -2- and the forward/back adjustment spindle using the :3409  .

Fig 2: Unclipping Retaining Tabs On Cover From Seat Rail And Removing Cover
GWWA72-10339Courtesy of AUDI OF AMERICA, LLC
CAUTION:

Risk of damaging the seat rail cover.

  • Proceed very carefully when removing and Installing.

-- Open the tabs -3, 4, and 5- on the seat rail carefully with a screwdriver and remove the cover -1- from the seat rail -2-.

scientia non olet · About LEMON Manuals