Front Parking Aid Sensor, Removing and Installing, Vehicles without Auxiliary Cooler: Removing
Exterior Sensors:
- Remove the front wheel spoiler. Refer to Wheel Housing Liner; Overview - Front Wheel Housing Liner
- If installed, remove the headlamp washer system spray nozzle and move it to the side with the washer fluid hose still attached. Refer to Front Parking Aid Sensor, Removing and Installing .
- Press both retainers to the side -arrows- and at the same time, push the sensor -3- through from the outside toward the inside.
- Disconnect the connector -2- by sliding the retainer -1- back and pressing the release down.