Recirculation Door Motor -V113-, REMOVING AND INSTALLING: Removing

-- Move the passenger seats as far back as possible.

-- Turn off the ignition.

-- Remove the glove compartment. Refer to Storage Compartments and Covers .

-- Loosen the wiring harness -E- from the air intake housing.

Fig 1: Disconnect Control Motor Shaft From Air Recirculation Door Shaft

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -B-.

-- Disconnect the actuator shaft -C- from the air recirculation door shaft -D-.

-- Mark the connector -A- if necessary (to rule out an interchange in the event several connectors are disconnected at the same time).

-- Disconnect the connector -A-.