Airflow Door Motor -V71-, REMOVING AND INSTALLING: Removing

-- Move the passenger seats as far back as possible.

-- Turn off the ignition.

-- Remove the air intake housing. Refer to HEATER AND A/C UNIT AIR INTAKE HOUSING, REMOVING AND INSTALLING .

-- Remove the air intake housing from the air intake manifold. Refer to AIR INTAKE DUCT, REMOVING AND INSTALLING .

-- Remove the bolts -B-.

Fig 1: Counter Hold On Cam Plate And Disconnect Control Motor From Cam Plate

Courtesy of AUDI OF AMERICA, LLC

-- Counter hold on the curved washer -A- and remove the actuator -C- from the curved washer -A-.