BELT PULLEY, REMOVING AND INSTALLING, "Denso" A/C COMPRESSOR, VERSION "1": Notes
A/C compressor without A/C Clutch -N25-
NOTE:
Courtesy of AUDI OF AMERICA, LLC
Observe notes on replacing belt pulley -E-. Refer to OVERVIEW - BELT PULLEY, "Denso" A/C COMPRESSOR, VERSION "1" .
Perform preparatory work as for removing belt pulley. Refer to PRELIMINARY WORK FOR REPLACING BELT PULLEY .
The belt pulley is made of plastic and is sensitive to impact, therefore take special care when handling it.
If the drive plate -C- overload protection activates, rotate the pulley -E- using the outer part of the drive plate -C- so that the compressor shaft -B- and the hexagon head on the drive plate -D- (inner part of the drive plate -C-) do not rotate.