Condensation Water Drain, Checking: Checking
-- Turn off the ignition.
-- Remove the luggage compartment floor covering. Refer to LUGGAGE COMPARTMENT FLOOR PANEL, REMOVING AND INSTALLING , also see OVERVIEW - LUGGAGE COMPARTMENT FLOOR .
-- Bring the battery cooling module in the service position. Refer to BATTERY COOLING MODULE, BRINGING INTO SERVICE POSITION .
-- Check the condensation water drain -3- for debris and make sure it is installed correctly.
-- Check that the condensation water drain is in the correct position.
- The tab -2- must face the seam -1- in the bracket.