LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> SQ5 Premium Plus >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> A/C Compressor >> Heating, Ventilation & Air Conditioning (2 Of 2) (As Of 06.2014) >> 87 Air Conditioning >> Air Guide >> Air Intake Duct, Removing And Installing >> Installing

Air Intake Duct, Removing And Installing: Installing

Installation is carried out in the reverse order while observing the following.

-- Insert the air intake duct -B- into the brackets -C- on the air intake housing -C- and join both parts together.

NOTE:

If one of the retaining tabs -A- has broken off or if one of the welded points no longer holds, both housing parts can be bolted together with screws -D-.

-- Install the removed parts in the opposite order.

-- Perform a basic setting and the output diagnostic test mode for the A/C system using the Vehicle Diagnostic Tester in the "Guided Fault Finding  " function.

-- Check the DTC memory for the Climatronic Control Module -J255- display and control head and erase any displayed malfunctions, if necessary using the Vehicle Diagnostic Tester in the "Guided Fault Finding  " function.

scientia non olet · About LEMON Manuals