LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> SQ5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 559 (Final Drive & Differential - MULTITRONIC Transmission 0AW (Sedan) (As Of 11.2014)) >> 39 Final Drive, Differential >> Seals >> Input Shaft Seal, Replacing

Input Shaft Seal, Replacing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2016 Audi A4, 2015 Audi A4, 2014 Audi A4, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Procedure 

NOTE:

The input shaft seal can only be replaced for removed transmissions.

-- Remove the transmission. Refer to TRANSMISSION, REMOVING AND INSTALLING .

-- Replace the input shaft seal. Refer to INPUT SHAFT SEAL, REPLACING .

-- Refer to ATF LEVEL, CHECKING after installing the transmission.

scientia non olet · About LEMON Manuals