LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> SQ5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Gears, Shafts - S-TRONIC Transmission Internal Components 0B5 (Cabriolet)) >> 35 Gears, Shafts >> Specifications >> Fastener Tightening Specifications >> Transmission Intermediate Housing To Transmission Housing - Tightening Specification And Sequence

Transmission Intermediate Housing To Transmission Housing - Tightening Specification And Sequence

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S5, 2014 Audi S5, 2013 Audi S5, 2012 Audi S5, and 2011 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Transmission Intermediate Housing to Transmission Housing - Tightening Specification And Sequence
GWWA34-10981Courtesy of AUDI OF AMERICA, LLC
NOTE:

Replace the bolts.

-- Tighten bolts in 2 stages as follows:

Step Bolts Tightening Specification/Additional Turn
1. -Arrows- 8 Nm diagonally
2. -Arrows- 120° additional turn, diagonally