Input Shaft Seal, Replacing, 0BC: Notes

Special tools and workshop equipment required 

• Puller - Multiple Use VW391
• Slide Hammer Set - Adapter 40 VW771/40 from the Slide Hammer Set VW771
• Retainer - Drive Flange 3028
• Puller - Unit Injector T10055
• -2- Puller - Unit Injector - Adapter 2 T10055/2
• Seal Installer - Driveshaft Flange T40109
• Seal Installer - Input Shaft - Guide Sleeve T40222/1
• Sealing Grease G 052 128 A1
• Two M 8 x 30 Bolts
• One M 8 x 45 bolt