Driveshaft, Removing And Installing From Rear Final Drive: Notes

Special tools and workshop equipment required 

• Counterhold - Kit - Multiple Use T10172
• Counterhold - Kit - Adapter 5 T10172/5 (M8 Bolts)
• Counterhold - Kit - Adapter 6 T10172/6 (M10 Bolts)
• High Temperature Grease G 000 633

• Pay attention to the notes. Refer to OVERVIEW - DRIVESHAFT, BOLTS ON TRANSMISSION SIDE .
• A two-column workshop hoist should be used when working on the driveshaft.