Front Noise Insulation

Fig 1: Identifying Front Noise Insulation Assembly

Courtesy of AUDI OF AMERICA, LLC

1. Noise Insulation
   • Removing:
   • The front wheel spoiler is removed. Refer to OVERVIEW - FRONT WHEEL SPOILER .

     -- Remove the bolts -1- and -2- as well as the bolts at the bottom of the wheel housing liner (3 bolts on each side) and then pull the noise insulation toward the rear under the bumper.

   • When installing, slide the front noise insulation in under the bumper.
2. Bumper Cover
3. Spring Nut
   • Install on the bumper cover.
4. Bolt
   • 2.5 Nm
5. Rear Noise Insulation
6. Quick Release
   • Rotate 180° to the left to remove.
   • When installing, the connection must engage when rotating.
7. Bolt
   • 2.5 Nm
8. Spoiler

Vehicles with Parking Heater

Fig 2: Making Sure Exhaust Pipe Is Installed Correctly Inside Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

-- In vehicles with a parking heater, make sure the exhaust pipe is installed correctly in the noise insulation. .