Overview - Hood Latch

Fig 1: Overview Of Hood Latch

Courtesy of AUDI OF AMERICA, LLC

Hood Latch
- Loosen the upper bumper cover and push it aside.
- Disconnect the lid lock cable at the coupling.
- Disconnect the connector.
- Remove the bolts -1 and 2-.
  NOTE:
  To adjust the hood height, move the hood lock up or down as required.
Lock Carrier
Bolt
- 15 Nm
Clamp
- Install the cable and electric wire into the tab on the lock carrier and close the clip.
Lid Lock Wire
Cable Tie