Hood, Adjusting

Special tools and workshop equipment required 

• Gauge - Gap Adjustment 3371

Hood Gap Dimensions

Fig 1: Identifying Gap Dimensions

Courtesy of AUDI OF AMERICA, LLC

• Dimension -A- = 5.0 mm
• Dimension -B- = 4.5 mm
• Dimension -C- = 5.0 mm
• Dimension -D- = 3.0 mm
• Dimension -E- = 4.5 mm

Height Adjustment Stop Buffer

Fig 2: Identifying Height Adjustment Stop Buffer

Courtesy of AUDI OF AMERICA, LLC

1. Adjusting Buffer
   • Use for adjusting the height on the front side.
   • The adjusting buffer -2- must lightly contact the lock carrier when the hood is closed.
2. Spacer
   • The rubber buffers -1- function as a strike guard must not contact the lock carrier when the hood is closed.
3. Hood
4. Lock Carrier